Use a Clipping Mask when new paint needs to remain on a separate layer; use Alpha Lock when you intentionally want to paint into the existing artwork while protecting its transparent areas. Both can keep color inside a shape, but the next revision is where the difference becomes important.
If you shade a turquoise umbrella and later want a lighter shadow, a clipped shadow can be adjusted independently. A shadow painted with Alpha Lock belongs to the umbrella’s own layer. This guide compares those decisions through an original exercise, rather than asking you to memorize two similar-looking buttons.

Key Takeaways
- Alpha Lock changes existing artwork on the selected layer; it does not preserve a separate shadow pass.
- A Clipping Mask uses the visible content below to control where its own paint appears.
- Choose the method by what must remain independently editable.
- Keep an untouched version and test your layer stack before merging.
What is the practical difference between the two methods?
The official Procreate mask guide describes Alpha Lock as protection for transparent areas. Once it is enabled, painting is restricted to artwork already present on that layer. It is not the same as locking the whole layer against edits.
A clipped layer is separate. Its visibility depends on the content beneath it, so broad strokes can be visible inside the base shape while hidden beyond it. You are changing the added paint rather than replacing the base’s color.
| Question | Alpha Lock | Clipping Mask |
|---|---|---|
| Where does new paint go? | Into the selected artwork layer. | Onto a separate clipped layer. |
| Can only the added shadow have lower opacity? | Not independently after it is painted into the base. | Yes, while the shadow remains separate. |
| Does it need another paint layer? | No. | Yes. |
| Useful starting choice | Direct recoloring. | Shading you expect to revise. |
Neither option decides which part of the illustration you intended to edit. If the selected layer contains a background rectangle as well as the object, that rectangle is part of the available artwork. The actual pixels matter more than the layer name.
When is painting directly on the layer the right choice?
Alpha Lock is useful when replacing or modifying the existing color is the task. Imagine clean line art that should become dark blue instead of black. Painting on that line layer can be more straightforward than building a separate adjustment for every stroke.
In Layers, select the intended layer, tap it again, and choose Alpha Lock. Check the checkerboard in its thumbnail. The Layer Options documentation also explains that Fill Layer, with Alpha Lock active, fills the existing artwork rather than the surrounding transparency.
That fill is not a selective replacement of just one chosen color. If highlights and details already share the layer, they are included in what you are recoloring. Preserve a duplicate before trying a broad fill on finished work.
Turning Alpha Lock off allows future painting into transparent areas. It does not restore the previous colors. If you need to add a missing umbrella tip, disable it for that shape change and reassess what you want protected afterward.
When does a separate clipped layer save work?
Choose a Clipping Mask when the new marks have a separate job: a shadow, highlight, pattern, or texture that may need its own revision. A base color can then remain available while you compare several treatments.
Add a paint layer immediately above the base, select it, and choose Clipping Mask from its layer menu. Paint on the clipped layer. Before continuing, toggle its visibility to check that only the addition disappears.
That small check distinguishes a separate effect from a change accidentally painted onto the base. Rename the layer for its purpose, such as Umbrella shadow, so its role is clear when you return later.
The comparison published by Sketchar likewise separates same-layer recoloring from independent shading. Its workflow examples are useful context, but you do not need several blend modes to learn this distinction. Start with an ordinary opaque brush and a Normal layer.
What happens in a two-version umbrella exercise?
This is an original practice exercise, not a claim about a supplied project file. Draw one simple filled umbrella canopy on a transparent layer. Add the handle separately so the experiment concerns only the canopy. Preserve an untouched canopy and make two working copies.
Version A: make the shadow part of the canopy
Hide the other copies. On the first working canopy, enable Alpha Lock and paint a dark band along its lower edge. The band should stay inside the filled shape. Notice that the canopy thumbnail now includes the darker paint.
Try lowering that layer’s opacity. Both the canopy and shadow fade because they belong to the same layer. This is acceptable if the combined painted result is what you want, but it does not meet a request to soften only the shadow.
Version B: keep the shadow independent
Hide Version A, show the second unchanged canopy, and add a clipped shadow layer directly above it. Paint a similar band. Lower the shadow layer’s opacity: the band becomes lighter while the canopy layer’s opacity stays unchanged.
Now suppose the requested revision is a coral canopy with the same shadow placement. Recolor the separate base on a protected working copy, leaving the clipped marks in place. Inspect the color interaction and adjust the shadow if necessary; a preserved position does not guarantee the old shadow color still looks right.
The decision is now observable. Version B meets the independent-shadow requirement. Version A is a valid direct painting method, but the exercise shows why it is less convenient for this particular later change.
Why does the paint disappear or cover too much?
When a clipped brush stroke seems missing, check the base before repainting. An empty transparent layer supplies no visible shape. A thin outline supplies outline pixels, not a filled interior. A solid imported white background supplies a rectangle, even if it looks like empty canvas.
- Confirm which layer is selected and whether it contains the marks you expect.
- Check that the clipped paint overlaps visible base content.
- Inspect layer visibility and opacity before assuming the brush failed.
- Check the stacking order after moving layers; clipping depends on what is below.
Make one correction at a time. If you both fill the base and change the brush, you will not know which change solved the problem. Use a temporary test stroke, then remove it after checking.
Our beginner layer-stack guide covers building a base and separate effects from the start. Use that setup guide if your difficulty is organizing layers; use this comparison when the question is where the new paint should live.
How should you preserve the version you may need later?
Keep the editable project as well as any delivery image. A flattened export records the visible result, not the working relationship between canopy and shadow. Retain the layers that a likely revision actually needs.
Before merging, ask for one concrete change: can I hide the texture without losing the fill, or recolor the base without repainting its outline? If that task still works, your structure supports the intended edit. If it does not, revise the structure before adding more detail.
Layer availability depends on the canvas and device. When you need to simplify, preserve an editable copy first rather than merging the only version reflexively. Our transparent PNG export guide addresses delivery checks after the artwork is ready.
For a broader learning path, the Procreate for Absolute Beginners ebook is a relevant catalog starting point. The immediate exercise remains small: one object, one shadow, and one clearly defined revision.
Conclusion
Make the two umbrella versions and request the same change from each: soften only the shadow. Keep the method that supports your next edit with the least reconstruction. You can use both tools confidently once you know whether new paint belongs inside the original layer or on a separate one.
Frequently Asked Questions
Is a Layer Mask the same as a Clipping Mask?
No. A Layer Mask controls what is hidden or revealed using grayscale information associated with artwork. A Clipping Mask controls the visibility of a separate layer through content below. Choose a Layer Mask when hiding part of existing artwork is the job, rather than adding colored paint.
Can I recover the original color after saving an Alpha Lock edit?
Disabling Alpha Lock will not recover it. An untouched duplicate or earlier saved version can provide the original; without one, you may need to repaint. Preserve a working original before experimenting instead of depending on an unlimited future undo history.
