To export a transparent PNG from Procreate, hide the Background Color layer, check that no other visible layer contains an unwanted solid backdrop, and choose Actions → Share → PNG under Share Image. Save the file, then test the exported PNG over a colored background. A white preview by itself does not establish whether transparency survived.
This guide covers a finished two-dimensional illustration in Procreate for iPad. The worked example follows a leaf drawing that still exports with a white rectangle. You will isolate the cause, preserve the editable artwork, and check the actual deliverable rather than relying on how the canvas looked before export.

Key Takeaways
- PNG supports transparency, but visible white pixels remain white pixels.
- Hiding Background Color may not remove a separate painted or imported backdrop.
- Use Share Image for one combined illustration, rather than exporting each layer separately.
- Keep the editable master and test the saved PNG before delivery.
What must be transparent before export?
Transparency means the artwork has areas through which a background beneath it can show. A white area can look similar on a white page, but it behaves differently when you place the image over another color. The export can preserve transparent areas; it cannot infer which visible white shapes you intended to remove.
Start by inspecting the corners and the space around the illustration. Ask whether those areas belong to the artwork or should reveal the destination background. White highlights inside a painted flower may be intentional. A large white rectangle around the flower may be an unwanted backdrop.
The official Layers handbook explains that Background Color has its own visibility checkbox. Hide that background and inspect the result. If the image still sits on a white rectangle, investigate the other visible layers before changing export settings.
Keep the intended use in mind. A decorative element for a colored presentation needs different surrounding pixels from a finished picture designed on a white page. Decide what should remain visible before attempting any cleanup.
How do you prepare layers without damaging the original?
Keep the original layered artwork intact and make a working copy when you need to experiment. Exporting a PNG creates a flattened deliverable, so it should not be your only version of a piece you expect to edit later.
Turn off obvious background or paper-texture layers one at a time. Observe which change removes the unwanted area. Do not delete an unfamiliar layer immediately; it might contain a shadow, a highlight, or another part of the composition you want to preserve.
A worked example: the leaf that kept its white rectangle
Imagine your leaf drawing has three visible parts: the green illustration, a white paper-texture layer, and Background Color. Hiding Background Color changes nothing because the paper texture still covers the canvas. Hide the texture and the surrounding area becomes transparent.
Now inspect the leaf itself. Its pale veins remain, which is correct: those are visible marks inside the drawing. You have identified a background-layer problem without erasing the highlights. If the leaf and white paper were flattened together earlier, hiding a separate layer would not solve it; you would need to refine the working copy.
Our introductory layer exercise explains how separating elements makes later changes easier. Use that organization while creating your next illustration so background cleanup does not become a repair job at the end.
Which PNG option should you choose?
Open Actions, choose Share, and select PNG in the Share Image section. Then choose an available saving destination, such as Files. Use a location you can find again and give the deliverable a recognizable name.
Procreate’s Share documentation distinguishes exporting the combined image from sharing individual layers. The PNG choice under Share Image creates a single flattened image. Share Layers treats layers as separate exported images, which is a different deliverable.
| File or option | Useful purpose | What to check |
|---|---|---|
| PNG under Share Image | One illustration with transparent areas | Visible layers and the final saved file |
| PNG under Share Layers | Separate layer images | Whether separate files are actually required |
| Native .procreate file | Editable Procreate artwork | Retain a safe copy of the master |
| JPEG | A flattened picture where transparency is unnecessary | Do not use it for this transparent-background task |
Do not treat the presence of PNG in a filename as a visual check. The image may be a valid PNG containing an opaque white background. Choose the right format, then verify what its pixels actually do in the next step.
Keep the exported file separate from any screenshot of the canvas. A screenshot records the visible screen, including its presentation background. It is not a substitute for exporting the artwork.
How can you test the exported file?
Test the saved file, not only the source canvas. Create a separate test canvas, import the exported PNG, and put a solid colored layer beneath it. The handbook’s supported-file guide confirms PNG import support. Use a copy for testing so you can leave the original artwork untouched.
Look at the space around the illustration. If the lower color shows through, that area is transparent. If a white rectangle covers it, the delivered image still contains an opaque backdrop. Return to the working artwork and inspect visible layers again.
Repeat with a light background and a darker contrasting one. An edge that blends into white may stand out against navy or green. Check at the size the artwork will normally appear, then inspect a little closer if you notice a fringe.
In the leaf example, the corrected PNG reveals both test backgrounds around the leaf, while its pale veins remain visible. That is the expected result. The test confirms the distinction between transparent surroundings and intentional light-colored details.
If the destination is another design app or website, place the same saved file there as a final check when you can. Testing it in the intended context can reveal a background or edge issue that a neutral preview concealed.
What causes white boxes or pale edges?
A white box usually calls for a layer or pixel check. Confirm that you exported the latest version, that Background Color was hidden, and that a paper, imported image, or filled layer was not still visible. Keep those possibilities separate instead of repeatedly changing the file extension.
A pale edge can come from visible light pixels around the artwork. Changing the underlying background makes them easier to see. Refine the working copy carefully, keeping soft shadows or delicate marks that belong to the illustration. Do not remove all pale detail merely to make the dark-background test look cleaner.
Another possibility is a misleading preview. Some viewers display transparent images against white. If the imported PNG passes the colored-layer test, that white preview may simply be the viewer’s background. Use the test result to distinguish a display choice from an actual opaque rectangle.
Compare the right files when troubleshooting. An older export in Photos and a newer export in Files can have similar names. Note the destination and version you tested, and replace only the deliverable you intend to update.
How should you name and deliver the final files?
Use a simple name that identifies the artwork, format, and version, such as leaf-illustration-transparent-v2.png. Avoid final-final filenames when several attempts are circulating. The recipient should be able to identify the tested file without opening every attachment.
Ask what pixel dimensions and file format the destination needs. A transparent background is only one requirement. A clean PNG can still be unsuitable if it is too small for its intended use or if the receiving workflow needs an editable source.
Keep the native master alongside a record of the exported version, rather than replacing it with the flattened PNG. The final illustration and the editable project serve different purposes. Include only the files you have agreed to share.
Procreate for Absolute Beginners is a related BestDigiBooks guide for building the wider workflow. For this task, a useful delivery note is brief: identify the PNG, state that you tested it on light and dark backgrounds, and mention whether an editable master is included.
Conclusion
Export one illustration after checking its visible background layers. Reimport the saved PNG over a light layer and a dark layer, inspect the edges, and keep the file that passes both checks. Retain the editable master so future changes do not depend on the flattened export.
Frequently Asked Questions
Can someone open the PNG without owning Procreate?
They need an app that can display PNG images, rather than Procreate itself. Send the exported PNG for ordinary viewing or placement, and explain separately if you are also supplying a native .procreate project. Ask about the recipient’s workflow when they need to edit layers rather than use the finished illustration.
Can I use the PNG for print?
Ask the printer which format, pixel dimensions, and background treatment its workflow needs. A transparent PNG may suit some uses, but transparency alone does not establish print suitability. Check the final artwork at the intended physical size and follow the printer’s file requirements.
